Forums
Forums
Notifications
Clear all
Topic starter
I have a Suzuki Liana.
I have been trying for days to get the connection working, changed 3 obd adapters
After looking for fixes, came to know about app SZ viewer A1
The data shows up in SZ viewer A1 like rpm, injector , coolant etc but torque pro doesn't connect with ecu
The ecu icon keeps blinking
I tried adding the PIDS you shared but still no connection.
Here is the SZ viewer A1 screenshot : removed link
It uses K-line Which should be supported by torque pro so I dont know the issue.
The OB2 adapter is a good quality one i have tested it with Toyotas and Hondas of my friends
ANY Help would definitely be appreciated as my use is specific to torque.
Posted : 08/06/2025 11:17 pm
Hi!
If the adapter icon is blinking continually, then it means the app isn't able to connect to the adapter which could mean that you have the wrong adapter selected in the settings, or, that the adapter is already connected to another app/device
Once the app is connected to the adapter, the car icon will blink whilst the adapter establishes a link with the ECU, and then all should stay on solid on OBD2 vehicles
Posted : 10/06/2025 9:18 am
Topic starter
First of all thank you so much for responding.
The ECU (car icon) icon keeps blinking not the obd adapters light
Adapter icon stays solid.
Posted : 10/06/2025 11:51 pm
