Forums
Forums
Notifications
Clear all
Topic starter
Hi,
Does anyone have stability issues with latest update version 1.8.48 ?
Since this version my Torque Pro started randomly closing itself without any notice or displayed error ...
My config is below;
Samsung T110 on Android 4.2
Clone ELM327 adapter using ISO 9141-2 (5 kbaud) protocol
When the crash to desktop happens I can re-run Torque, connection is quickly done to adapter but as expected I loose all the trip details 🙁
Logging is completely disabled, Torque refresh times and response is nice before and after the ctd.
I also have Torque installed on my phone running Android 4.4, did not find time to test it but it is updated too 🙁
Any ideas ?
Best wishes
Posted : 26/12/2014 3:34 pm
Topic starter
*** Status update after version 1.8.49 ***
Today I installed the latest version, unfortunately situation gone extremely worse.
Before : CTD only, fast restart was possible
Now : Complete restart or lock of the Samsung Tablet.
After restart Torque Widget control automatically switches to on position (which was turned off and stayed off before), bluetooth connection to adapter is too slow or completely impossible. ( If Torque can establish connection to adapter and ecu, data rate is ok, no slowdown or lag there )
I checked my settings for HTC & Samsung bluetooth workaround, it is set to auto.
I tested my adapter with different programs on different cars today ... Adapter works fine and no-restart, no connection problems occured.
So my only suspection is Torque Pro itself 🙁
I hope Ian reads this posts ...
Best wishes
Posted : 28/12/2014 4:55 pm
