Forums
Forums
Notifications
Clear all
Topic starter
I have complied a hughe list of the non standard ford pids I have tried to figure out the equations and cannot, I then found a list of the Equations and it gives me erorrs when I try to enter them in. Has anybody made up a list of Ford 7.3 L. I know if we could get this working there is a ton of 7.3 and 6.0 owners that would buy this program to monitor their trucks
For example;
EOT
Engine Oil Temp
1310
DEGREE
??? What is the eqaution
Posted : 02/02/2011 2:49 am
The quation I have is (data/100)-40). For Torque you would set the PID as 221310 and the equation SHOULD be (((A*256)+B)/100)-40
This equation assumes Torque knows you used a 2 byte PID instead of the basic 1 byte PID. I'll try it our on my 6.0 later. You can see my write up in another thread why the trans temp doesnt work. I have tried to get EGT manually w/o using Torque, but my truck does not support it apparently. 🙁
Posted : 02/02/2011 1:00 pm
Some success with EOT...
http://torque-bhp.com/forums/?wpforumaction=viewtopic&t=301.00
Posted : 03/02/2011 11:41 pm
