Forums
Forums
Notifications
Clear all
Topic starter
I using Torque Pro with a OBDLink® MX+ on my Triumph Tiger 800
It used to work find. Then I had to have my phone repaired and they reset the whole screen so I lost all the setup. I had to re-configure.
I think I all got it right but for some reason the kpl (l/100km)
reading started really high (13000l) both for the instantaneous and per-trip and comes down to only about 3-4kl/100km
something is clearly wrong. I tried resetting the trip but it did not help (started again at 13k and came down to only 3k)
What do I need to reset this to properly work?
Also: can the 'reset trip' button be smaller? There is apparently no way to make it small/tiny. it takes huge space on the screen (yes. I know i can put it into the back and hide by other widgets)
Posted : 27/06/2020 11:34 am
Topic starter
Ok. The biggest problem was that I accidentally entered 800l instead of .8l for my engine size. That helped a lot. However, the kpl readings (both instantaneous as averages and trip) are still ca 2-3x too high compared to what the bike's onboard computer displays (and that matches my fuel usage calculations on each refill).
So what could influence that?
Posted : 01/07/2020 4:23 am
