Forums
Forums
Notifications
Clear all
Topic starter
Ian is it possible to get the GPS speed minus the decimals. This is because my OBD speed is displayed without the decimals and except when the Gps spped is at X.00 the Speed Difference dial will show some discrepancy which represents the decimal part of the gps speed.
Maybe you could work out a method where the user can select whether they wish the gps speed to show with or without the decimals or do away with the decimals entirely. I am not even sure whether any vehicle shows Obd speed with .xx
Regards, Ed
Posted : 19/09/2012 12:56 pm
You should be able to press-and-hold on the display, go to 'display configuration' (for the readout type display) and then set the maximum number of decimal places to 0
It's on my list to add this for other display types too (dials, etc) but the readout display type should already do this
Posted : 21/09/2012 7:32 am
Topic starter
Thank you for the tip Ian. I had not noticed the decimal settings. I guess you learn something new every day.... 😉
Please see what you can do about the font for stored Odometer settings where the last digit if the value is above 100,000 appears to be crossing outside the selected dial area. Thx
Posted : 21/09/2012 7:59 am
Topic starter
Ian, I removed the decimals as instructed. However, with the removal of decimals there appears to be a a big lag whenever the dials are updating the speed. The biggest lag is with the Speed Difference Dial which seems to take ages to update the difference. Thus even where both the GPS and OBd speeds are reading similar speed the speed diff will not be reading Zero instantly and will take several seconds to update by which time the other dials will have moved on..... This behaviour never used to be there with the decimals on 🙁
Posted : 01/10/2012 6:40 am
