Forums
Forums
Notifications
Clear all
Topic starter
Just thought I would drop a note about the Gear Selected display, in current config it will only show up to gear 4 even though it has 6 gears. You need to edit the custom PID and change the OBD Header from Auto to 7e1 as this is the Auto header code, after doing this you have all 6 gears displayed 🙂 Enjoy!
Note: this is tested on a Series 1 2006 BF XR6 Turbo Falcon with the 6 speed ZF Auto.
Posted : 04/08/2011 6:13 am
Thanks for the note! I'll update the predefined PID list accordingly!
Posted : 04/08/2011 8:11 am
Have you got the transmission temp working as well with the ZF?
Posted : 22/05/2012 11:24 pm
Hey Guys, have any of you had any success getting engine oil temp, I've heard mixed results of some individuals getting a reading (BF F6) while others claiming that the oil pressure switch isn't part of the OBD2 system.
Also came across this topic which makes reference to a Transmission oil temp pid being 1674
http://www.fordmods.com/ecu-fuel-system-eec-f21/ba-bf-sx-sy-scantool-fun-t25010-405.html
However I've been unsuccessful in getting it to work.
Posted : 30/05/2012 2:48 am
Topic starter
Hi, the ECU does not monitor the actual oil temp, it simply has a switch that tells it when it exceeds a preset temp, indicating that it is too hot. You have to add an oil temp sensor and gauge to monitor it (most of us turbo guys do this)
Cheers,
Snoopin99
Posted : 24/08/2012 1:27 am
Hi
I have a Samsung Galaxy S2 and I get all 6 gears showing up there but when I use my Galaxy 10.4 Tablet i only get 4 gears ,, any ideas why?
Thanks
Pommie
Posted : 20/12/2014 10:11 am
Any Thoughts on why I get 6 gears showing in my Galaxy S2 but only 4 in my Galaxy Tab??
Posted : 30/12/2014 7:13 am
