Forums
Forums
Notifications
Clear all
Topic starter
Hello,friends. ELM327bluetooth1.4, but he does not see the ECM mazda xedos9 2.3 mce J1850PWM. Scanner connects to the Samsung NOTE, programm TORQUE PRO., who knows how to put together , help please.PS. ELM327USB v1.4 conected to ECM and shows the data on the computers(FORScan).....
Posted : 19/11/2012 10:23 am
Hi
If you're really using J1850-PWM (primarily a Ford ECU protocol) and the vehicle is OBD2 compliant, then it should be working with Torque
If you're using a clone adapter though, then it may not be working for the J1850-PWM protocol (this seems to be the case with a number of the clone adapters) and you may have one of these adapters - there's a note about this on http://torque-bhp.com/wiki/Bluetooth_Adapters as I've had a couple of people with Fords and it not working on the J1850-PWM protocol due to defective adapters.
If this is the case then you should be able to get the adapter replaced by the seller as they are aware that some of the clone adapters can be a bit 'iffy'
Posted : 20/11/2012 10:35 pm
Topic starter
Thank you, Ian.
Posted : 21/11/2012 7:06 am
