Forums
Forums
Notifications
Clear all
Topic starter
I would like to figure out how to use Torque Pro to read the balance rates on a 2005 Duramax LLY. I've done hours of searching on the web and if the balance rates PIDs are out there, I can't find them. There are some posts about the subject on this forum but no final answer.
I tried using the TorqueScan plugin to search through the extended PIDs. The plug-in crashes after 10 minutes or so. It runs through PIDs quickly at first, then slows down, then crashes.
All I really want are the balance rate PIDs and formula if available. If I had the PIDs I could borrow a TECHII and figure out the formula.
Posted : 20/01/2013 3:34 pm
Topic starter
Can anyone suggest where to search for this information? I've pretty much gotten as far as I can with Google.
Posted : 24/01/2013 3:08 am
Topic starter
Does anyone know why PID Scanner in Torque Scan hangs? I've tried changing the OBD2 adapter settings. The option to disable ELM327 auto-timing helped but it still hangs. The farthest it's gotten so far is Command=2202a7. When the scan hangs and Torque Scan exits all of the PID command/response info is lost. Can the command/response information be logged to a file?
Posted : 27/01/2013 4:02 pm
Hi
I posted something on this some time ago to try to get things moving forwards:
http://torque-bhp.com/forums/?wpforumaction=viewtopic&t=2507.0
Having just come back to that thread, it appears I had an offer (though was not able to follow it up). I'll try to dig this information out again and update that thread
Posted : 28/01/2013 9:18 am
Topic starter
Your thread was one of the search hits I looked at. Do you have the PID codes for the balance rates?
Posted : 28/01/2013 1:15 pm
Topic starter
Were you able to dig up the PID?
Posted : 03/02/2013 7:26 pm
