Forums
Forums
Notifications
Clear all
Topic starter
Evening guy's, just need a little advice as to what's wrong!
I'm using the 327 with a Sammy S3, had it working loads of times but plugged it in the other night and it wont work right?
It connects fine and it lets me do a fault check but none of the dials are working? Adapter says it's connected fine and all ticks where they should be (from what I can see)
I have done nothing new to the car or phone so not a clue why it's stopped working so throwing the question out there incase someone has had the same thing or knows of a fix?
Thanks in advance 🙂
Posted : 10/02/2014 10:39 pm
Topic starter
Anyone?
Posted : 28/02/2014 6:41 pm
Have you tried adding a new display
to see if it works?
Are you using the latest version of
Torque as there has been new fields
added to the pid editor?
Are you showing errors under the
adapter status icon?
Posted : 28/02/2014 7:17 pm
Topic starter
Thanks for the reply Capp
Quote from Capp777 on February 28, 2014
Have you tried adding a new display
to see if it works?
Yes added a few but still nothing showing
Are you using the latest version of
Torque as there has been new fields
added to the pid editor?
Not sure what version I have but no I have not updated it at all, but it was working fine the last time I used it!
Are you showing errors under the
adapter status icon?
No errors, it comes up connected but nothing happens IE the dials dont show anything like they did before, I can do a fault code check which is strange!
Posted : 28/02/2014 7:59 pm
Topic starter
Well bought another ODB2 thinking it might of gone faulty, tried it tonight and still the same 🙁
It connects to the ECU and ticks where they should be but still no working clocks?
The 4 lights that come on, first one flashes the other 3 stay lit!
Posted : 05/03/2014 6:46 pm
What vehicle are you using it with?
Have you tried another vehicle?
Posted : 05/03/2014 7:09 pm
Topic starter
Quote from frodus on March 5, 2014
What vehicle are you using it with?
Have you tried another vehicle?
2003 Impreza STi, it's been working fine for months untill now 🙁
Not tried it on another as yet but will sometime this week as I have a few mates using it
Posted : 05/03/2014 7:57 pm
Your connector maybe the issue bent pins,
trash, short etc.
Trying Torque and your adapter on a different
vehicle could help diagnosis if it is a problem
on the vehicle side.
Posted : 05/03/2014 8:02 pm
Topic starter
I thought the same, that's why I bought another connector/dongle but still the same 🙁
I did just notice the ODB icon at the top of my screen keeps going from yellow to green!
Posted : 05/03/2014 8:08 pm
But you are using the new adapter in the same
vehicle... same results. Have you tried your old
adapter in a different vehicle? Presumably one
that doesnt have a connector problem just to see
if your problem moves to another vehicle.
You didnt say...
Posted : 05/03/2014 9:36 pm
Topic starter
Ok I got around to having 2 cars the same with me yesterday and tried their ODB along with mine, their phone, along with mine and still nothing 🙁 not sure why it's just stopped and why it wont connect with other dongles in different cars!
I'm thinking now I should reset my phone to factory settings and try again spending more time to mess?
Posted : 22/04/2014 5:02 pm
Same with me. Two different dongles that have been working in different vehicles stopped working at the same time. Tried them with nexus 4 and 7 and same thing on both. Can connect to them, see what codes are stored and erase them but when I try real time information they both disconnect and won't reconnect without me turning blue tooth off and back on.
Both are cheap Chinese dongles but if torque won't work with them anymore I will just buy a Interceptor gauge rather than paying the money for one of their "approved" dongles.
Posted : 26/04/2014 11:03 pm
Im having same problem on a 07 WRX JDM. All icon is connected and solid. ECU connected. Not real time data available either.
Anyone managed to fix this pls?
Posted : 09/05/2014 3:30 pm
