Forums
Forums
Notifications
Clear all
Topic starter
I just got an obdlink MX yesterday and downloaded the pro version of the app. After a little poking around I found that the boost reading only goes up to around 3 lbs. Searched around and found that this was a pretty common problem. I haven't seen any discussion on the topic since early 2012 though where you suggested that we use the alt calculation in the settings. This did not work BTW 🙂 it was reading far too high foot my stock 335i. Have you figured out the proper settings for this car yet? Am I able to provide anything to you that would help? Let me know!
PS would you happen to know the BMW oil temp PID?
Posted : 05/02/2013 3:23 pm
Topic starter
Still havent gotten correct boost readings. Any bmw owners out there available to help?
Posted : 08/02/2013 11:01 pm
having same problems as you and some other questians (e.g. themechange). But there is not any answer. Think this is definitely the worst forum I ever saw. As soon snow is gone will make some further tests with my ALPINA B3.
d.
Posted : 26/02/2013 8:07 pm
The BMW SAE PID maxes out, that is why it won't go any higher. The vehicle won't report anything higher without a BMW specific PID
Posted : 27/02/2013 11:25 pm
Topic starter
which costs a ton to get ahold of 🙁
Posted : 28/02/2013 3:31 am
