Torque

Forums

Forums

Notifications
Clear all

Audible Alarms

7 Posts
5 Users
0 Reactions
1,319 Views
 OjNK
(@ojnk)
Posts: 1
New Member
Topic starter
 

Trying to figure out how to do audible alarms, it looks from the configuration screens like I should be able to do this but so far no sound. I'd prefer just a beeping noise over a spoken alarm. I want to use Torque and an old Tablet as a quick gauge in a rally car and warn on things like over coolant, under voltage, etc.

I've put a gauge on the screen and went into the guage specific configuration and set an Alert Maximum. The gauge flashes which is good, but no sound. Am I missing something? (Yes, the volume on my device was turned up to max)

 
Posted : 14/10/2012 10:04 pm
(@nightrider)
Posts: 27
Eminent Member
 

Me too 🙂 (wants this feature)
Also, I couldn't find a way to change the alert temperature min/max thresholds from the preset values (Torque lite).

 
Posted : 29/12/2012 4:14 am
(@admin)
Posts: 6550
Member Admin
 

Hi!

You should be able to do this already - you will need to look at the app settings. There are 2 types of alarms in Torque - a 'warning' display style alarm (which is the flashing display which is only checked when the display is visible) and the main alarm segment (described below) which is checked all the time.

In the settings screen, scroll to the bottom, where it says 'Manage Alarms' - go into this screen and you can create an alarm and set what you want it to do (overheating, etc)

The alarm should be nice and loud when triggered

 
Posted : 31/12/2012 2:42 pm
(@mr-edd)
Posts: 3
New Member
 

Hi,

I wish to ser up a couple of alarma (refrigerant and speed)
Following instrctions I cannot found the alarm configurations.
I hace Lite versión by now to test ir.

¿Hoy can I ser up alarma without start to learn scripts?

Best Regards,
Eduardo

 
Posted : 20/02/2022 3:38 am
(@steffe2)
Posts: 19
Active Member
 

Quote from Mr. Edd on February 20, 2022
Hi,

I wish to ser up a couple of alarma (refrigerant and speed)
Following instrctions I cannot found the alarm configurations.
I hace Lite versión by now to test ir.

¿Hoy can I ser up alarma without start to learn scripts?

Best Regards,
Eduardo

Settings->Manage Alarms, then just add and configure the sensor you want to monitor, speed (GPS) should always be available, coolant depends on if the car sends it (it should).

 
Posted : 20/02/2022 9:44 am
(@admin)
Posts: 6550
Member Admin
 

Hi!

Alarms are only in the pro version, not lite

 
Posted : 20/02/2022 11:40 am
(@steffe2)
Posts: 19
Active Member
 

Ah, I see. I've had pro for quite a while, so I've forgotten what was in that version ?

 
Posted : 20/02/2022 12:36 pm
Share:

  Follow me on twitter