Forums
Forums
Notifications
Clear all
Topic starter
My car is Toyota Alphard 2009 3,500cc v6 (GGH20)
I had install the the Torque Pro, and it had show the coolant and transmission oil temp, but seems like both temp are showing the same thing.
And I asked my mechanic to plug in the scanner to check, and found out that the ATF temp should be a lot lower, and I can't find the way to set up the display for ATF temp, pls help.
Posted : 22/05/2016 9:36 am
try extended PIDs 21B4, Formula A-38
Posted : 22/05/2016 11:06 am
Topic starter
How?
Posted : 22/05/2016 5:12 pm
From the mainscreen in Torque Pro:
Menu>Settings>Manage extra PIDs/Sensors
Menu>Add Custom PID
Use the info above to add a custom PID.
Note your pid long name must be unique.
Once created and tested successfully you
can go back to realtime dashboard and add
display using its unique name.
Posted : 22/05/2016 11:19 pm
Topic starter
While I am setting up,
I put 21b4 for the PIDs
And A-38 for Equation
Is there anything else I need to input?
Such as minimum and mixmium value?
Scale factor?
Unit type?
Posted : 03/06/2016 6:12 pm
Set the min/max to 0/100 and Torque
will auto range as needed.
Typically A-40 is for °C and
A*(9/5)-40 for °F. Not sure if
that applys for your vehicle.
Scale x1
Posted : 03/06/2016 9:04 pm
Topic starter
Tried, but seems like this pins code not the atf temp....
Posted : 04/06/2016 8:57 am
Topic starter
Anyone can help?
Posted : 05/06/2016 4:53 pm
I have a 2000 VW Eurovan. What do I need to do to get the ATF temperature?
Thanks
Posted : 05/06/2016 5:40 pm
Topic starter
I still didn't solve the ATF temp, anyone can help?
Engine model is 2GR-FE...
I am wondering if someone know how to set up the engine
Oil temperature and pressure as well?
Posted : 29/09/2016 4:21 pm
Hey.
Give your mail.
Posted : 29/09/2016 5:54 pm
Quote from copper_90680 on June 5, 2016
I have a 2000 VW Eurovan. What do I need to do to get the ATF temperature?
Hi Copper. I've got a '97 T4 and am hoping you figured out whether/how to get the ATF temp display setup, please?
Posted : 19/12/2017 2:06 pm
