Arduino & OBD simultaneously - Torque main forum

RE: Arduino & OBD simultaneously

Overlying0907 — Tue, 23 Jul 2024 17:48:35 +0000

Quote from moreause on July 19, 2024 it may be car specific but personnaly when i needed to add sensor with an arduino i was asking torque for an adress that is not reported by the pcm and used the arduino to respond instead ... torque didn't know better since somebody did respond lol oh just saw my anser was up there lol

Cheers! I missed that with the last few messages continuing to ask for this feature.

RE: Arduino & OBD simultaneously

moreause — Fri, 19 Jul 2024 15:10:22 +0000

it may be car specific but personnaly when i needed to add sensor with an arduino i was asking torque for an adress that is not reported by the pcm and used the arduino to respond instead ... torque didn't know better since somebody did respond lol oh just saw my anser was up there lol

RE: Arduino & OBD simultaneously

Overlying0907 — Thu, 18 Jul 2024 19:49:48 +0000

This is an old thread. My apologies if there is a newer thread on this topic. While hunting for a way to monitor both OBDII and addition sensors, I found torque-arduino. This seems like an ideal way to add more sensors outside OBDII. The Kiwi 2 and iMFD sensors used to be a clunky solution for this, but the Kiwi 2 is long out of production. Has there been any further work on this?

RE: Arduino & OBD simultaneously

discorama — Fri, 06 Sep 2019 04:46:51 +0000

Please add this feature. Many ECUs do not provide sufficient data for engine monitoring. I made an Arduino adapter to add oil temp, pressure as well as transmission temps, battery voltage(s!) aso. This would really add a lot of value to the app.

RE: Arduino & OBD simultaneously

warrior64nd — Fri, 06 Sep 2019 00:48:58 +0000

+1 A plugin or app feature to allow this would be fantastic

RE: Arduino & OBD simultaneously

moreause — Thu, 14 Feb 2019 06:56:39 +0000

personally i was using an arduino to insert value into the can bus before it was an option over here i used a can bus break out ..and used an address that the car would not answer to ... and used the arduino to reply instead torque was not seeing any difference

RE: Arduino & OBD simultaneously

toalan — Tue, 12 Feb 2019 08:06:50 +0000

Want this too. Ideally you would be able to run a OBD reader and multiple arduino connected devices.

RE: Arduino & OBD simultaneously

moreause — Thu, 01 Feb 2018 02:56:04 +0000

like i said .. you can easely do it with an arduino i did it in the past you just need to play a bit with an arduino obd program i just used a standard pid adress that my car was not responding to and the arduino was responding instead torque doesn't see the difference as long as somebody answer the request

RE: Arduino & OBD simultaneously

hwfreak — Mon, 22 Jan 2018 01:19:29 +0000

Quote from admin on July 29, 2016 Hi! Not yet - at the moment the arduino is instead of an OBD adapter, though if enough people request that ability I could also add it I request too :)

RE: Arduino & OBD simultaneously

C4Vette — Fri, 26 May 2017 21:04:06 +0000

Is this already possible? Anybody tried? Would be cool to monitor aftermarket stuff.