Forums

Guest
Welcome Guest, posting in this forum require registration. Username Password Remember me

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Nissan Murano- No response from ECU

Pages: [1] 2

Author	Topic: Nissan Murano- No response from ECU

Espe

Member
Posts: 15

Nissan Murano- No response from ECU
on: March 19, 2015 (GMT)

– Nissan Murano 2007
– ELM327
– Phone Samsung Galaxy S5

– Bluetooth is ON
– Connection to ELM is ON

Finally: “No response from ECU”

Please… try to help!!!

deilyn

Member
Posts: 8

Re: Nissan Murano- No response from ECU
on: March 19, 2015 (GMT)

first test with HobDrive… and tries to place the initialization command to see if it works…!

Lista de cadenas de inicialización:

Toyota JDM Nadia / Harrier:
ATIB96 ATIIA13 ATSH8213F1 ATSPA5 ATSW00
Toyota JDM ISO9141:
ATSP3 ATAL ATIIA33 ATIB10 ATSH686AF1 ATST32 ATSW00
Toyota JDM común:
ATIB96 ATIIA13 ATSH8113F1 ATSPA4 ATSW00
Toyota JDM 10400baud:
ATIB10 ATIIA13 ATSH8013F1 ATSPA4 ATSW00
Toyota JDM PUEDE mode21:
ATSP6 ATAL ATSH7E0 ATCRA7E8 ATST32 ATSW00
Toyota GT86:
ATSP6 ATAL ATSH7E0
Fiat Pre-OBD:
ATSH 8110F1
Nissan personalizado:
ATSP5 ATAL ATIB10 ATSH8110FC ATST32 ATSW00
Mitsubishi MUT:
ATSP0 ATAL ATIB10
Tiggo Delphi MT20U:
ATSP5 ATAL ATIB10 ATSH8111F1 ATST32 ATSW00
Delphi MR240:
ATSP5 ATAL ATSH8111F1 ATWM8111F13E
WHA enero:
ATSP5 ATAL ATIB10 ATSH8110F1 ATST32 ATSW00
WHA Bosch MP7:
ATSP5 ATAL ATIB10 ATSH8111F1 ATST32 ATSW00 ATFI
WHA Bosch 797:
ATFI ATAL
Siemens ACR167 KWP:
ATSP5 ATAL ATSH8111F1 81
Sirius D42:
ATSP5 ATAL ATIB10 ATSH8211f1 ATST32 ATSW00 ATFI
UAZ 1797:
ATSP5 ATAL ATSH8110F1 ATFI
Opel KWP2000:
ATSP5 ATAL
Toyota Celica:
ZZT230 ATIB 96 ATIIA 13 ATSH8113F1 ATSP A4 ATSW00
Toyota Vitz:
01.2002 ATSH8213F1 ATIB96 ATIIA13
Japón Mercado Nacional Nissan:
ATSP5 ATAL ATIB10 ATSH8110FC ATST32 ATSW00
Japón Mercado Interno Nadia / Harrier:
ATIB10 ATIIA13 ATSH8013F1 ATSPA4 Un TSW00

Capp777

Member
Posts: 2993

Re: Nissan Murano- No response from ECU
on: March 19, 2015 (GMT)

Also Torque Wiki for custom init string…

http://torque-bhp.com/wiki/Custom_Init

Espe

Member
Posts: 15

Re: Nissan Murano- No response from ECU
on: March 19, 2015 (GMT)

OK… So I have to write this string: ATSP5\nATAL\nATIB10\nATSH8110FC\nATST32\nATSW00

BUT… do I have to write those “\n” -marks also or this way:
ATSP5 ATAL ATIB10 ATSH8110FC ATST32 ATSW00

Capp777

Member
Posts: 2993

Re: Nissan Murano- No response from ECU
on: March 19, 2015 (GMT)

Yes… they represent new line feed
before executing the next command(s).

(Custom configuration string field at end
of vehicle profile).

Search thread… “OBD for Japanese Cars” for
additional info.

http://torque-bhp.com/forums/?wpforumaction=viewtopic&t=819.0

Espe

Member
Posts: 15

Re: Nissan Murano- No response from ECU
on: March 20, 2015 (GMT)

Doesn’t work yet…

I wrote this string and now when trying to connect to ECU it says “Checking model…” (or something like that, I don’t have english version of Torgue). Model of ECU??? How long this should take?
If I look “Adapter Status” – “Adapter errors”. There’s 0 errors, but sometimes over 10 “other faults”.
Do I have to check the box “Use alternative OBD…” ?

Capp777

Member
Posts: 2993

Re: Nissan Murano- No response from ECU
on: March 20, 2015 (GMT)

Sorry, I’m not knowledgeable about your
vehicle. Is it possible that your Nissan
speaks Consult and requires a specific adapter?

http://torque-bhp.com/forums/?wpforumaction=viewtopic&t=1793.1

Torque Wiki shows a specific adapter for Nissan
Consult.

Hopefully someone more knowledgeable will
respond.

cintakc

Member
Posts: 1661

Re: Nissan Murano- No response from ECU
on: March 20, 2015 (GMT)

CAN EOBD protocol adress ECU 7DF

Espe

Member
Posts: 15

Re: Nissan Murano- No response from ECU
on: March 21, 2015 (GMT)

Sorry… I don’t understand.
Can you explain what I have to do with Torgue?

cintakc

Member
Posts: 1661

Re: Nissan Murano- No response from ECU
on: March 21, 2015 (GMT)

specify the version of the adapter
you must set the preferred protocol ISO 15765-4 (11/500)
and prescribe the initialization string
ATSP6\nATSH7DF

Espe

Member
Posts: 15

Re: Nissan Murano- No response from ECU
on: March 21, 2015 (GMT)

All right… now I got connection to ECU. But no data. And connection to ECU stop working after about 1-2 minutes. And when I look “Adapter Status” – “Adapter errors”. There’s 0 errors, but still over 10 “other faults”.

I check “Test Results” and it says “ECU does not appear to support MODE S06”

Adapter version is 2.1

cintakc

Member
Posts: 1661

Re: Nissan Murano- No response from ECU
on: March 21, 2015 (GMT)

Give a link to the adapter
screens on the status of the adapter, which is determined by the protocol
terminal program to check the responses to requests:
atz
atal

https://play.google.com/store/apps/details?id=com.drively.elmterminal

Espe

Member
Posts: 15

Re: Nissan Murano- No response from ECU
on: March 23, 2015 (GMT)

I’m sorry but I don’t understand exactly what mean.
I download ELMBASIC but I don’t understand how it works? Type some command and push “SEND” ??

cintakc

Member
Posts: 1661

Re: Nissan Murano- No response from ECU
on: March 23, 2015 (GMT)

yes,
enter the command ATZ and Send
enter the command ATAL and Send

Espe

Member
Posts: 15

Re: Nissan Murano- No response from ECU
on: March 24, 2015 (GMT)

ATZ gives “ELM327 v2.1”
ATAL gives “?”

cintakc

Member
Posts: 1661

Re: Nissan Murano- No response from ECU
on: March 24, 2015 (GMT)

your adapter version 2.1 will only run on a standard protocol EOBD
your car should work on EOBD CANNES
set TORQUE Lite(free) and try to connect to the car

Espe

Member
Posts: 15

Re: Nissan Murano- No response from ECU
on: March 24, 2015 (GMT)

Not working with Lite version:
– first looks good; checking protos
– connecting to OBD
– OBD not found

Should I change some settings?

cintakc

Member
Posts: 1661

Re: Nissan Murano- No response from ECU
on: March 25, 2015 (GMT)

protocol set manually

shudman

Member
Posts: 4

Re: Nissan Murano- No response from ECU
on: March 25, 2015 (GMT)

How do you set the proto manually ? Is it different in the Lite version ? I don’t seem to have anything in the Settings menu that depicts “change from auto to manual”

Espe

Member
Posts: 15

Re: Nissan Murano- No response from ECU
on: March 25, 2015 (GMT)

I think it’s Menu>Settings>”Select What to Log” menu option? When I press the ‘Select What to log’ menu option, it takes me to a new screen and briefly shows a pop-up stating “Press ‘Menu’ to add extra OBD PIDs to log”. The Samsung Galaxy S5 does not have a menu button.

Pages: [1] 2

WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.061 seconds.

Forums

Forums

Guest